2713-00032 Bucket Tooth – Doosan DH360 Reference – Aftermarket Replacement

The 2713-00032 bucket tooth is an aftermarket replacement reference commonly listed for Doosan/Daewoo DH360 excavator bucket applications. It is used to identify a replaceable tooth at the working end of a matching bucket adapter. The machine reference provides a starting point for selection; the installed bucket, adapter nose, tooth pocket and retention arrangement must be checked before an order is confirmed.

A bucket tooth engages the material during excavation. Replacement selection therefore involves both the mounting interface and the working profile. For earthmoving or other digging work, buyers should identify the ground conditions and compare the requested profile with the existing assembly. A machine model alone does not identify every bucket fitted over the machine's operating life, particularly where the bucket or tooth system has been changed.

For accurate identification, send all visible part markings, including prefixes, leading zeros, letters and profile suffixes. References encountered in aftermarket catalogues can be useful search terms, but they should not be treated as proof that two products are interchangeable. In particular, standard, RC and TL descriptions must be checked separately. Confirm the intended tooth profile rather than assuming that a shared number family means an identical replacement.

The mounting comparison should use clear photographs of the existing tooth, the adapter nose and the retention components. A rear view of the removed tooth is especially useful for identifying the pocket. Where dimensions are required, record them in millimetres and identify the measurement locations on the photographs or drawing. Useful checks include the pocket opening, pocket depth, pin-hole shape, hole size and hole position relative to an agreed reference surface. Wear can change these features, so describe the condition of the sample and provide an unworn reference or approved drawing when available.

For distributors and importers, a complete enquiry should also state the quantity, required profile, destination and purchasing schedule. Repair workshops, contractors and equipment maintenance teams should include information about the bucket currently installed, rather than relying only on the machine nameplate. If the part number is missing or partly worn away, identification can begin with photographs and measurements, with the proposed replacement submitted for confirmation before supply.

Material grade, hardness, heat treatment, dimensions and weight should be specified for the quoted product. These details cannot be transferred from another supplier's listing simply because it uses the same reference. The quotation should also define the product finish, inspection requirements, packaging and delivery arrangements. Confirm the inclusion and quantity of any adapter, pin, retainer or other hardware in writing.

YASSIAN is a China-based factory supplier of construction machinery wear parts and ground engaging tools. Contact our team with reference 2713-00032 and the available assembly information to request a compatibility review and quotation. This product is supplied as an aftermarket replacement, with final selection based on the confirmed specification and intended application.

Key Features

• Aftermarket replacement reference: 2713-00032.

• Replaceable bucket tooth category for a matching excavator bucket assembly.

• Doosan/Daewoo DH360 catalogue reference for initial identification.

• Selection based on the tooth profile, adapter interface and retention arrangement.

• Enquiries for distributor, importer, contractor and maintenance purchasing.

• Product specification and supply scope to be defined in the quotation.

Compatible Machine Models

Commonly catalogued for Doosan/Daewoo DH360 excavator bucket applications. Compatibility depends on the actual bucket and installed tooth system. Confirm the tooth profile, adapter nose, pocket and retention arrangement before ordering.

Reference Part Numbers

2713-00032 is the enquiry reference for this listing. Aftermarket catalogues also group 713-00032, 2713Y00032 and 713Y00032 with this reference; these are identification leads and require a compatibility check. No OEM supersession or unconditional interchangeability is claimed. Standard, RC and TL profiles must be identified separately.

Applications

• Excavator bucket tooth replacement after compatibility verification.

• Earthmoving and digging applications with a suitable confirmed tooth profile.

• Replacement-part enquiries from distributors, importers and repair workshops.

• Contractor and fleet maintenance procurement based on the installed bucket assembly.