332/C4388 / 400/F0341 Bolt-On Center Bucket Tooth for JCB-Compatible Backhoe Buckets

The 332/C4388 bolt-on center bucket tooth is an aftermarket replacement for selected JCB-compatible backhoe-loader and excavator bucket applications. The legacy 332/C4388 reference has been superseded in JCB parts channels by 333/D8455 and the current 400/F0341 Supertooth reference.

Its one-piece, twin-strap bolt-on design mounts directly over a compatible bucket cutting edge. Unlike adapter-and-pin tooth systems, this tooth is retained by two plow bolts and nuts, allowing straightforward replacement without a separate adapter or locking pin.

The centered Shark-style profile is suitable for general excavation, trenching, landscaping and mixed-soil digging. Compatibility must be checked by part number, cutting-edge thickness, bolt-hole diameter and bolt-center spacing. Machine model alone is not sufficient because different buckets may use different tooth arrangements.

The 332/C4388 is the center tooth. The similarly numbered 332/C4389 and 332/C4390 are side-tooth references and should not be ordered as direct substitutes for the center position.

This is an aftermarket replacement product. JCB and related part numbers are used solely for identification and compatibility reference.

Features

• Aftermarket replacement for legacy reference 332/C4388

• Commonly cross-referenced to 333/D8455 and 400/F0341

• One-piece bolt-on center tooth design

• No separate adapter, pin or retainer required

• Twin-strap mounting for compatible bucket cutting edges

• Centered Shark-style profile for general excavation

• Suitable for selected backhoe-loader and mini-excavator buckets

• Replaceable wear component for simplified bucket maintenance

• Custom coating, marking and export packing available

Applications

Recommended for:

• General earthmoving

• Utility trenching

• Landscaping

• Site preparation

• Mixed-soil excavation

• Agricultural and construction digging

• Selected JCB-compatible backhoe-loader buckets

• Compatible mini-excavator buckets using the same bolt pattern