135-9397 Bolt-On Bucket Cutting Edge for Selected Cat Loaders – Aftermarket Replacement

Short Description

The 135-9397, also written as 1359397, is a bolt-on bucket cutting-edge reference for selected Cat loader bucket configurations. This listing is for an aftermarket replacement. The OEM catalogue identifies a centre-position edge with eleven mounting holes. Compatibility depends on the bucket, complete hole layout and fastener arrangement. Provide the existing part number, machine and bucket identification, photographs and measured dimensions so that the required edge specification and supply scope can be reviewed before ordering.

Full Description

The 135-9397, also written as 1359397, is a bolt-on bucket cutting-edge reference used in selected Cat loader bucket configurations. This listing concerns an aftermarket replacement for purchasing enquiries. The replacement specification should be confirmed against the existing bucket and the required mounting arrangement. Cat names, machine references and OEM part numbers identify the application and do not indicate genuine Caterpillar manufacture.

A bucket cutting edge fits along the lower front lip of the bucket and provides a replaceable wear surface where the bucket engages material. For a correctly selected configuration, replacement enquiries may involve stockpiling, material re-handling, excavating and bank loading. The material being handled, operating conditions and condition of the existing bucket should be considered when defining the replacement requirement.

The OEM catalogue identifies this reference as a centre-position bolt-on edge with eleven mounting holes. Checking only the hole count is insufficient. Compare the complete outline, hole positions, mounting face, end offsets and fastener seats. Published references distinguish end-hole spacing from the other hole-spacing field, so a short description of one spacing should not be treated as a complete drilling pattern.

The fastener arrangement also requires attention. The OEM listing refers to machine-screw mounting, while some aftermarket suppliers describe plow-bolt versions under related references. Confirm the hole geometry and required fasteners on the actual edge and bucket. A matching reference or similar overall length does not establish that the fastener seats and mounting details are identical.

Reference applications include selected skid steer, compact track, multi terrain and compact wheel loader buckets. Machine identification is useful for the initial search, but the fitted bucket determines the required edge. Record the bucket manufacturer, identification number and existing edge reference where available. Nominal bucket width and the measured cutting-edge length are different information and should be stated separately in an enquiry.

For compatibility review, provide photographs of both faces, the mounting holes, each end and the edge in its installed position. Include the overall dimensions, thickness, hole sizes, centre-to-centre distances and distances from the ends to the hole centres. An approved drawing or an unworn sample is particularly useful when the old edge is worn, modified or no longer carries a readable part number.

Distributors and importers should state the required quantity and any repeat-purchase requirements. Repair businesses, contractors and equipment operators should identify the bucket configuration and exact replacement scope. Before ordering, agree the material requirements, any hardness requirements, dimensional acceptance criteria and inspection documents for the quoted item. Confirm any required screws, bolts, nuts or other hardware separately, together with packing requirements, destination and requested delivery date. The quotation and approved specification should define the supplied product, price and delivery arrangements.

Key Features

• Aftermarket replacement reference 135-9397 / 1359397.

• Bolt-on cutting-edge type for bucket lip wear-part replacement.

• Centre-position application identified in the OEM reference.

• Eleven-hole catalogue configuration for mounting comparison.

• One-piece cutting-edge reference for selected Cat loader buckets.

• Straight end shapes identified in the OEM listing; verify the quoted outline.

Compatible Machine Models

Selected OEM reference applications are shown below. Each requires a bucket configuration using 135-9397. Confirm the machine PIN or serial number, bucket identification, edge outline and mounting details before ordering.

Reference Part Numbers

135-9397 and 1359397 are common written forms of the same reference. Related OEM mounting references are 159-2953 screw and 8T-4778 nut. These are hardware references, not alternative cutting-edge numbers. Confirm the actual hole geometry, required hardware and inclusion in the quotation. No additional fully interchangeable cutting-edge number is stated.

Applications

• Bucket lip cutting-edge replacement for the verified bucket configuration.

• Stockpiling and material re-handling.

• Excavating and bank-loading enquiries, subject to bucket and specification review.

• Loader-bucket maintenance for repair businesses, contractors and equipment operators.

• Replacement-parts procurement for distributors and importers.