Contact us Today by Email | info@china-yasheng.com

132-4720 Bolt-On Bucket Tooth: Fitment and RFQ Guide

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
sharethis sharing button
132-4720 Bolt-On Bucket Tooth: Fitment and RFQ Guide

A 132-4720 bucket tooth replacement should be checked against the bucket edge and mounting hardware before an order is approved. The machine model helps identify the application, but the tooth must also match the bucket currently installed. For a buyer, the key question is whether the proposed part and fasteners match that actual connection.


This guide explains how to identify the reference, compare mounting details and prepare an RFQ for an aftermarket replacement. It focuses on the information needed to evaluate an offer before purchasing.


Identify the One-Piece Bolt-On Tooth


132-4720 one-piece bolt-on bucket tooth showing mounting holes, working tip and bucket-edge contact area


Caterpillar identifies 132-4720 as a bolt-on Uni-Tooth bucket tip that does not require a separate adapter. The reference is also commonly written as 1324720. Preserve both the original marking and the full supplier reference in your purchasing record.


This distinction changes the order. A one-piece bolt-on tooth combines the working tip and bucket attachment in one component. An adapter-based arrangement has a separate replaceable tip and an additional connection to verify.


If the existing bucket has separate tips fitted over adapter noses, investigate that arrangement before treating 132-4720 as the replacement. A general description such as “loader bucket tooth” does not establish that the attachment system matches.


Verify the Bucket Behind the Machine Model


The OEM description names certain buckets for 902, 906 and 908 loaders. The word "certain" matters: this is not confirmation that every bucket fitted to those machines accepts the tooth.


Record the machine model and serial number, followed by the bucket identification or assembly reference where available. If the bucket has been replaced, repaired or modified, identify its current edge arrangement separately.


Photograph the complete bucket and the existing tooth location. Keep any readable part markings in a separate close-up. For a distributor buying for several customers, separate different bucket configurations rather than combining them into one model-based order.


Compare the Mounting Geometry


Request a drawing for the proposed replacement and compare it with a verified sample or the relevant assembly information. Overall length is useful for identification, but the attachment details deserve their own checks.


Feature

What the comparison should establish

Mounting holes

Hole count, opening shape and centre positions

Hole spacing

Centre-to-centre distances with clearly defined references

Edge interface

Contact profile and the corresponding bucket-edge geometry

Fastener seating

Bolt-head clearance, seating face and access for the nut

Overall envelope

Tooth outline and clearance relative to adjacent components


Keep bolt diameter separate from hole diameter and head-seat dimensions. They describe different features.


132-4720 bucket tooth mounting geometry showing bolt hole spacing, bucket-edge interface and bolt head seat


Mark the units and measurement locations on every sketch. If an old tooth is worn or a hole has elongated, label that condition; its measured size should not automatically become the new-part specification. Where the intended geometry is unclear, obtain the correct drawing before approving production.


Check the Edge Where the Tooth Seats


A correct tooth reference cannot resolve damage in the bucket edge. Inspect the contact area for visible cracking, deformation, worn openings and previous repair work before using it as the basis for a replacement order.


Photograph irregularities and identify which mounting location is affected. Have the maintenance team assess whether the edge remains suitable for the intended assembly.


Do not treat drilling new holes, enlarging existing openings or grinding contact surfaces as routine fitment adjustments. Such changes need an approved repair or modification decision. The procurement specification should describe the required fit before the parts arrive.


Specify the Hardware and Supply Scope


Ask for a tooth-only quotation or an explicitly itemised tooth-and-hardware quotation. A photograph without bolts does not establish that hardware is excluded, and a generic kit title does not establish exactly what is included.


For each proposed fastener, confirm its reference or drawing, thread, diameter, length, head form and required nut arrangement. Check usable engagement and clearance against the actual assembly documentation rather than selecting hardware solely because it passes through the hole.


State the number of fasteners supplied per tooth and whether those quantities cover the complete order. Installation torque, tightening sequence and any follow-up checks must come from the applicable instructions for the confirmed assembly and hardware. They should not be inferred from a similar-looking tooth.


Match the Application Without Assuming Performance


Describe the handled material and normal task: for example, loading loose aggregate, moving soil or working through compacted material. Include any repeated tooth breakage, loose hardware or unusual wear in the enquiry.


These observations help the supplier review the requested configuration. They do not, by themselves, prove that a different material, hardness or tooth shape will solve the problem.


Request product-specific evidence when a quotation makes material or inspection claims. Factory-wide capabilities do not establish the manufacturing route, hardness or acceptance criteria for an individual replacement tooth. Agree on the relevant requirements for the item being purchased.


Build an RFQ That Can Be Checked


Send one consistent information package to each supplier:


  • Requested reference: 132-4720 / 1324720, plus photographs of existing markings.

  • Machine model, serial number and available bucket identification.

  • Overall bucket photographs and close-ups of the tooth attachment.

  • A drawing or key mounting measurements with units and reference points.

  • Tooth quantity and an itemised requirement for bolts, nuts and other supplied components.

  • Working material, operating conditions and any recurring service issue.

  • Destination country and port, requested delivery basis and required inspection documents.


Ask the supplier to identify discrepancies before quoting a confirmed replacement. For a bulk order, retain the accepted drawing revision, sample identification and supply scope with the purchase order. This provides a shared reference for inspection and later repeat orders.


Request a Fitment Review from YASSIAN


132-4720 bolt-on bucket tooth RFQ checklist for fitment verification and replacement part sourcing


For a 132-4720 aftermarket replacement enquiry, send YASSIAN your part number, machine and bucket details, photographs, drawing or key dimensions, quantity, working conditions and destination. Specify whether you need teeth only or a quotation including mounting hardware.


Explore our bucket teeth range, then contact YASSIAN to discuss the required configuration and RFQ details.

HOT PRODUCTS
Motor Grader Blades & End Bits
INFOMANTION
Blog
CONTACT US
Add: Hengxi Industrial Park, Yinzhou, Ningbo, Zhejiang, China
Email: info@china-yasheng.com
Web: https://www.yassian.com
Tel: (+86) 18067438979
 
SCAN TO YOUR MOBLIEPHONE
Copyright 2021 Ningbo Yasheng Casting Industry Co., Ltd.All Rights Reserved.