- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
9N4253
Caterpillar
Product Description
The 9N4253 is an aftermarket heavy abrasion bucket tooth referenced to the Cat-style J250 system. Also written as 9N-4253, this reference identifies a replaceable tooth for a matching bucket adapter. The profile is associated with abrasive loading and earthmoving applications. YASSIAN supplies aftermarket wear parts to distributors, importers, repair businesses and equipment operators. Confirm the existing tooth number, adapter interface, retention arrangement and required product specification before ordering. Pins, retainers and other components should be specified separately in the inquiry.
The 9N4253 is an aftermarket heavy abrasion bucket tooth referenced to the Cat-style J250 tooth system. The same reference is written as 9N-4253 in Caterpillar parts information. It identifies a replaceable ground engaging component for the working edge of a compatible bucket. YASSIAN offers this item as an aftermarket replacement part for distributors, importers, repair businesses and equipment operators purchasing against an existing tooth reference.
For the intended installation, the tooth fits onto a matching adapter at the bucket working edge and is retained by the appropriate tooth-retention components. The reference design belongs to the side-pinned J-Series family. Compatibility depends on the tooth pocket, adapter nose and retention arrangement working together. A machine model is useful background information, but the actual bucket assembly must also be checked, particularly where a bucket has been replaced, repaired or fitted with a different tooth system.
The heavy abrasion designation identifies the reference profile for loading and material-handling conditions where abrasive wear is relevant to tooth selection. Sand, gravel and shot rock are application examples associated with this profile in published parts information. Buyers should describe the material being handled, the work performed and any impact conditions. These details help establish whether the selected profile meets the requirement; the profile name does not define a tested service life or a specific material grade for the supplied part.
Use the complete reference 9N4253 or 9N-4253 when requesting a quotation. Other J250 teeth may have different profiles and ordering numbers, even when they belong to the same tooth-system family. A shared system size does not establish that two references are identical products. Any proposed alternative should be checked against the required interface, tooth profile and retention configuration before an order is placed.
For a compatibility review, provide the old tooth number, adapter identification, machine make and model, serial number and bucket details. Clear photographs should show the tooth from both sides, the rear pocket, the working end and the adapter nose. If a drawing or dimensional record is available, identify the measurement points and units. Where the old tooth is heavily worn, include information from the adapter or an unworn comparison part so that wear is not mistaken for the original geometry.
Distributors and importers can include the required quantity, stocking schedule and destination with the inquiry. Maintenance buyers should also state whether the request concerns individual replacements or a planned bucket repair. If material documents, hardness records or dimensional inspection results are required for purchasing approval, identify those requirements before ordering. The agreed specification and available supporting documents should be confirmed for the actual supplied part.
Contact YASSIAN with the part reference and the information needed for a compatibility review and quotation. Confirm the supplied component list, packing requirements, delivery terms and approved specification in writing. State separately any pins, retainers, adapters or other items required with the tooth. The quotation and order agreement establish the supply scope for the shipment.
9N4253 reference, also written as 9N-4253, for purchasing identification.
Heavy abrasion tooth profile associated with the Cat-style J250 system.
Replaceable bucket tooth for an approved matching adapter.
Side-pinned J-Series reference design; confirm the actual retention arrangement.
Profile reference for abrasive loading and earthmoving applications.
Offered as an aftermarket replacement part by YASSIAN.
Catalogue reference applications include selected Cat 311B, 311C, 312B, 312C, 312C L and 312D L excavator bucket assemblies. Confirm the actual Cat-style J250 adapter, tooth pocket and retention arrangement before ordering. Machine model alone does not establish compatibility.
9N4253 / 9N-4253 are two written forms of the same reference. Any different replacement number requires a separate compatibility review.
Replacement of a bucket tooth where the heavy abrasion profile is specified, including abrasive loading and earthmoving involving sand, gravel or shot rock. Review the actual bucket configuration, working conditions and agreed product specification.
