Domite Wear Bar is a combination of high chromium (700 brunell) white iron bonded to a mild steel weldable backing plate. Wear bars and blocks are available in thicknesses ranging from 25mm to 100mm, widths from 25mm to 300mm wide and in varying lengths.Popular for use in rock box protection, impact areas and transfer points, bars can be provided with Nelson studs with size and and location to suit.
This Bi-metallic wear resistant product, as a combination of high chromium cast iron (ASTM A532 15/3CrMo, 700BHN – 63HRc) metallurgically bonded to a mild steel backing plate, obtains both very high abrasion resistance and weldability.
Chemical Composition of White Iron
C Cr Mn Mo Cu P Si S B,V,Nb
2.5~3.5% 15~18% 0.5~1.0% 0.5~2.5% 0.5~1.0% ≤0.02% 0.5~1.0% ≤0.02% 0.1~0.5%
Chocky Bars Wear Buttons Wear Donuts
Standard Wear Bars Micro-Ledges Wear Plates
Rock Box Liners Skid Wear Bars Shaped Wear Bars
Wafer Strips Grizzly Bars Elbow Wear Bars
Shredder Hammer Tips Knife Edges Overlay Wear Plates
Wear Pads Jaw Crushers Chute Linings Ore Chutes
Crusher Chutes Tripper Chutes Flop Gates Bucket Liners
Grizzly Bars Lip Protectors Screen Plates Vibratory Feeders
Floor Liners Loaders Wear Aprons Knife Inserts
Crusher Bars Run Out Rolls Dump Hoppers Crusher Hoppers
Specifications of Standard Wear Bars, wear bar
-Better wear resistance performance
Notes: Arc studs available as per sizes or drawings provided.