Tractors – Front End Loaders

Tractors – Front End Loaders

Why should you be careful when using a front end loader?
Tractors with front-end loaders are often involved in accidents. Adding a front end loader changes the tractor’s centre of gravity. When a loader is raised, the tractor’s centre of gravity is raised and moved forward. The tractor’s stability is reduced; thus, increasing the chance of overturning.

What should you do when using a front end loader?
Ensure that everyone is well back from the tractor when operating a front-end loader.
Add recommended wheel ballast or counterweight according to the manufacturer’s instructions.
Move wheels to widest recommended setting.
Travel with the load as close to the ground as conditions permit. (If the rear of the tractor lifts, the bucket will hit the ground before the tractor tips.)
Travel with the load as close to the ground as conditions permit
Operate controls from the operator’s seat only.
Watch for overhead powerlines, depressions, obstructions, and uneven ground.
Operate and turn tractor at low speeds. Do not use jerky movements.
If necessary, back down the hill with a load. Do not travel forwards downhill with a loaded bucket.
Drive the tractor in a straight line while loading the bucket. Keep the load in the bucket balanced.
Lower loader to the ground, stop the engine and lock the brakes before leaving operator’s platform.
Travel in a straight line when raising the bucket to unload.

Go as close to the dump site as possible before raising the bucket.
Go as close to the dump site as possible before raising the bucket
Remove the loader from the tractor when not in use, if possible.

Tractors – Front End Loaders

What should you avoid?
Do not travel with the bucket in a raised position.
Do not try to load and turn at the same time. Hitting a solid object could easily overturn the tractor.
Do not turn with a load raised above the tractor. A quick turn can tip the tractor.
Do not allow anyone to ride or work in the bucket of a front-end loader.
Do not use the bucket as a work platform.
Do not stand or work under a raised loader.
Do not allow anyone to walk under bucket, even by accident.
Do not drive with an elevated load
Do not leave loader in raised position.
Do not use loader for unintended purposes such as removing fence posts, towing, or to knock something down.

CAT & Komatsu tooth-pins

Wholesale Grader Blade End Bit 234-70-12650

232-70-52191 China Manufacturer Komatsu Machine End Bit

Caterpillar 4D5757 End Bit for Grader

Excavator Bucket Side Cutter

Caterpillar Style Rock Penetrator Bucket Teeth 4T2353PT

1U3252RC N2 Track Excavator Bucket Teeth