Forged Excavator Forging Bucket Teeth Tooth J450Single Tiger Point 9w8452TL 1U3452TL

Forged Excavator Forging Bucket Teeth Tooth J450Single Tiger Point 9w8452TL 1U3452TL

How often should loader bushings be replaced?

The replacement cycle for loader bushings depends on operating conditions and material composition, typically ranging from 6 to 12 months or 2,000 to 3,000 hours. Specific standards are as follows:

Standard Replacement Cycle

Rubber bushings: 40,000–60,000 km or 6–8 months (prone to aging)

Metal bushings: 60,000–80,000 km or 10–12 months (more durable)

Harsh Conditions (e.g., mining, dusty environments): Replace 30%-50% sooner

Key Influencing Factors

Material Differences: Nylon bushings (e.g., Xinhe brand) offer superior wear resistance compared to standard rubber, but require regular wear checks

Workload Intensity: For continuously operating loaders, inspect bushings every 2000 hours

Lubrication Conditions: Poor lubrication accelerates wear; synchronously inspect lubrication system

Xinhe Small Loader Forklift Parts Bushings Forklift Components Wear-Resistant Bushings Nylon Bushings Pin Bushings

Inspection and Maintenance Recommendations

Monthly Check: Inspect for surface cracks, deformation, and clearance fit

Warning Signs: Replace immediately upon detecting abnormal noise, increased vibration, or oil leakage

Record Management: Maintain a replacement log for precise maintenance based on equipment operating hours