8J4043 Caterpillar Replacement Parts Motorgrader Cutting Edge 16mm

☑ Affordable price                                                            ☑ Customized design is Available                     ☑ T/T, L/C or other payment accepted

☑ Fast shipping, Worldwide delivery                               ☑ Quality guaranteed                                         ☑ Bulk discounts for larger orders

8J4043 Caterpillar Replacement Parts Motorgrader Cutting Edge 16mm Specifications:

Part name: Grader Blade
Part No: 8J4043, 8J-4043
Machine : Motor Grader
Weight: 86 pounds 39 kg.
Information:
BEVEL ANGLE 22.5
BOLT HOLE SIZE 18 mm
HOLE SPACING 152.4 mm
LENGTH 2436 mm
NUMBER OF HOLES 17
THICKNESS 15.9 mm
WIDTH 152.4 mm

We specialize in supplying quality Komatsu CAT/Caterpillar Shantui cutting edge to world famous customer.Our Komatsu CAT/Caterpillar Shantui cutting edge have been exported to more than 50 countries of the world.The quality of our Komatsu CAT/Caterpillar Shantui cutting edge is approved by the largest distributors in Europe and USA. Replacement Volvo Grader End Bits

High Carbon Curved Cutting Edge
Curved edges penetrate the roadway better than flat edges while carrying existing material forward to leave a smooth even surface. High carbon edge offers better affordability than our through hardened steel, but has limited impact:
Attributes:
Where impact and abrasion are low, the thinner edge provides the most economical service. Thicker edges provide added strength and wear material for abrasive or high impact applications. 8J4043, 8J-4043 Caterpillar Genuine Motorgrader Curved Blade 16mm

Offer for instant purchase has cost one hundred and six dollars, forty-six cents, condition of spare part – aftermarket.
Specifications: weight (lbs) 1. For these characteristics delivery equals fifty-seven dollars, seven cents.
Part number 5D9558 EDGE-CUTTING BORON refers to: Ground engaging, Edges. High Carbon Curved Cutting Edge Grader Blade 9W-2302, 9W2302, 9W2302 High Carbon Curved Motor Grader Blade

109-3150/4T3512,2C3139,3G1626,3G1627,3G1628,3G2165,3G2166,3G9765,3G9766,3G8016,4T2231,4T2233,
4T2236,4T2237,4T2240,4T2242,4T2244,4T2966/5J6965,4T2967/5J6967,4T2968/5J6971,4T2969/5J6972,4T2970/6J2376,4T2971/6J2375,4T3007/5J6970,4T3032/6J2377,4T3033/6J2374,4T3034/8J5352,4T3035/5J6966,4T3036/5J6973,4T3037/6D4201,4T3511,4T6502/8D7702,4T6508/8D0173,4T6511/8D0226,4T8316,4T8317,4T9603,5B5561,5B5562,5B5563,5B5564,5D9553,5D9554,5D9556,5D9557,5D9558,5D9559,5D9561/4D9922,5D9562,5D9731/5D1163/5D1164,5D9732,6G8623,7D1158,7D1576,7D1577,7D1949,7D4508,7D4509,7T3493/4T2232,4T3494/4T2234,7T3495/4T2235,7T3496/4T2238,7T3497/4T2239,7T3498/4T2241,7T3499/4T2243,8D2786,8D2787,8D2788,8D2789,8J4043,8J7782,8J8980,8J9821,9J3655,9J3656,9J3657,9J3658,9J3659,9J3660,9J3862,9J3863,9J7701,9W1835,9W6252,9W2293,9W2295,9W2297,9W2299,9W2301,9W2303,9W2305,9W2307,9W2294,9W2296,9W2298,9W2230,9W2302,9W2304,9W2306,9W2308,9W2325,7T1640,7T1633,7T1645,7T1632,,9W2326,9W2327,7T1637,7T1626,7T1629,9W2331,7T1642,7T1635,7T1644,9W2336,9W2332,9W2333,9W2334,9W2335,9W2337,9W2309,9W2311,9W2313,9W2315,9W2317,9W2319,9W2321,9W2323,9W2310,9W2312,9W2314,9W2316,9W2318,9W2320,9W2322,9W2324,9W2328,7T1641,7T1636,7T1643,7T1631,9W2329,9W2330,7T1639,7T1624,7T1628,9W2338,9W2340,7T1634,7T1623,7T1630,9W2339, 9W2341,7T1638,7T1625,7T1627,232-70-12142,232-70-12143,232-70-12650,232-70-12651,232-70-52940,232-70-52850,232-70-52970, 232-70-52910,232-870-6310,233-70-12141,233-70-12450,233-870-6120,234-70-12192,234-70-12193,234-70-12250,234-70-12450, 234-70-12510,234-70-12550,234-70-12580,234-70-12640,234-70-12670,234-70-12710,234-70-16130,234-70-16290,234-70-16410, 234-70-16420,234-70-32620,235-70-12140,236-70-22120,237-70-12120,238-70-12220. Motor Grader Edge Cutting 5D-9556 5D9556

Typical Example1. Remove bolts (1), and pull governor drive (2) from the front drive housing.
Typical Example2. Make sure the O-ring seals are in position on the front of governor drive (1), and put clean engine oil on the seals.3. Put governor drive (1) in position, and install bolts (2) to hold it to the front drive housing.End By:a. install governorDisassemble Governor Drive
Start By:a. remove governor drive 1. Remove O-ring seals (1), (2) and (3) from the front of the governor drive housing.2. Remove the bolts that hold adapter (4) in position, and pull adapter (4) from the housing. 3. Remove pinion (5), shims (6), seals (7) and (8) from adapter (4). Measure the thickness of shims (6), and put identification marks on them for assembly purposes. 4. Remove hose assembly (9)(not included on later machines), cover (11) and the gasket from governor drive housing (10). 5. Remove gear (13) and coupling (12) from housing (10) as a unit. 6. Remove ring (14) to remove coupling (12) from gear (13). 7. If necessary, remove bearing (15) from housing (10).Assemble Governor Drive

9W2301 EDGE-CUTTING
9W2300 EDGE-CUTTING
9W2299 EDGE-CUTTING
9W2298 EDGE-CUTTING
9W2297 EDGE-CUTTING
9W2295 EDGE-CUTTING
9W2310 EDGE-CUTTING
9W2309 EDGE-CUTTING
9W2307 EDGE-CUTTING
9W2305 EDGE-CUTTING
9W2304 EDGE-CUTTING
9W2303 EDGE-CUTTING
Caterpillar