1062894 / 95 Router Bits RH/LH for Reynolds, CAT Wheel Tractor SCRAPER Router, 106-2894 ROUTER BIT, Caterpillar style Standard Heavy-duty Level Cut scraper blade bits router China supplier 1062894 / 1062895 Router Bits RH/LH for Reynolds Standard router bits are recommended for most applications. Heavy-duty router bits are similar to standard router bits but offer […]
Komatsu Bulldozer Blade 12F-70-31261, D31A17 Komatsu Dozer Cutting Edges, Dozer Bucket Replacement Bolt On Center Cutting Edge, Bucket Cutting Edges China Factory and Supplier
Komatsu Bulldozer Blade 12F-70-31261 Feature:
Komatsu Part No.: 12F-70-31261
Type: Bulldozer Blades
Size: 0.625” thick * 6.3125” wide * 35.875” length
Material: High carbon steel or Boron steel
Compatible Machine Models: D31A17 Dozer
Made in China
Komatsu style bolt on center cutting edge for a D31A17 Komatsu Bulldozer. This is a double beveled reversible bucket cutting edge that is .625” thick, 6.3125” wide and 35.875” in length. It takes 6 of a 5/8” X 2”(625X200) plow bolt and 6 of a 5/8”(625 HEX NUT) hex nut. The bolt hole spacing is 6” from center to center of the bolt holes, and 2.9375” when measured from the edge of the bucket cutting edge to the center of the first hole.
Weight: 37.26 lb / 16.9 kg
Edges and end bits to suit dozers, scrapers, graders, loaders and excavators
Komatsu Dozer BLADES End Bits cutting edges Grader End Bits
we have a complete range of blades, edges and end bits, shanks, teeth, ripper tynes, router bits and plow bolts and nuts to suit virtually every machine. Customer parts can be made to suit specialist requirements.
Dozer cutting edges and end bits
we have the complete range to suit Caterpillar, Komatsu and all other makes and models.
Hot Cupped End Bits provide maximum penetration.
We stock a complete range of thicknesses in standard and heavy duty.
Our bits and edges are heat treated through hardened, quenched and tempered alloy steel.
Bolt-On Reversible Blade Cutting Edges
Wear one side and reverse the edge for twice the life
Pre-drilled extra-hard carbon steel for maximum wear resistance
Side View of Edge Mounted on Bucket
Case was among the pioneers to develop and offer the industry bolt-on loader blades. This system makes blade changes simple, fast and inexpensive. You can change worn out bucket edges in minutes, in the field, with hand tools. By using reversible, double bevel flat sections, the wear life of the cutting edge is doubled.
How to Select the Right Edge
Use the following diagram to select the right edge for your bucket
Cutting Edge Sizing Chart
Bolt-On Reversible Blade Cutting Edges by Size