7J1791 Ripper And Scarifier Shank Adapter 8E8418

/7J1791 Ripper And Scarifier Shank Adapter 8E8418
  • 7J1791 Caterpillar Ripper And Scarifier Shank Adapter 8E8418

7J1791 Caterpillar Ripper And Scarifier Shank Adapter, 8E8418 Adapter Shank Fits Caterpillar, Replacement Caterpillar Adaptors, CAT SHANK PROTECTORS, Caterpillar ADAPTER (8E8418) New Aftermarket 7J1791, Ground Engaging Tools Spare Parts Wear Parts China Supplier

7J1791 Caterpillar Ripper And Scarifier Shank Adapter Specifications:
1.Part NO.: 7J1791  / 8E8418
2.Net Weight:  166.89 lb / 75.7 kg
3.Color: yellow or as require
4.material: Alloy steel with Cr,Mn,Mo,Ni,…
5.Technique: Precision casting
6.Certification: ISO9001:2008, ISO14001
7.Outer Packing: Iron or wooden cartons

D8K,D9H ripper shank adapter, the tooth point 9W2451, PROTECTOR 6J8814

In our system for 7J1791 ADAPTER market price is – two thousand, one hundred and fourteen dollars, twenty-eight cents. Number of supply options available at system – thirteen. Available quantity of goods – three. The minimum and maximum price for spare part is from six hundred dollars, quantity of suppliers found – thirteen.
Minimum and maximum price of an item on ebay starts at four hundred and ninety-eight dollars to eight hundred and twenty-one dollars, seventy-one cents, number of options found is two.
Replacement parts options is ten, supplier prices for cross-numbers vary three hundred and two dollars, ninety-two cents to four hundred and fifty-seven dollars, six cents.
The best offer for online shopping has cost six hundred dollars, condition of the part – aftermarket.
For the good 7J1791 ADAPTER, the following cross numbers are available: 8E8418.
Spare part specifications: weight (lbs) 171.6. For these parameters shipping in the United States is two hundred and fourteen dollars, five cents.

Product 7J1791 ADAPTER has categories: Ground engaging, Adapters, Shanks.
7J1791 Ripper And Scarifier Shank Adapters Caterpillar
4T8314 Adapter Caterpillar
4T8315 Adapter Caterpillar
4T4697 Ripper And Scarifier Shank Adapters Caterpillar
7J1769 Adapter Caterpillar
6J8887 Adapter Assem. Caterpillar
6J2639 Adapter Assem. Caterpillar
4T8313 Adapter Caterpillar

dozer ripper shank is fitted with a replaceable tungsten steel alloy tip, referred to as a ‘boot’. Ripping rock breaks the ground surface rock or pavement into small rubble easy to handle and transport, which can then be removed so grading can take place.

Bulldozer Rippers shank are used in land clearing operations where heavily compacted soil or frozen ground must be separated, allowing easier grading and dozing to take place. The steel shanks penetrate the surface of the soil to break and loosen it, enabling the dozer blade to move the soil.

quality ripper units are designed to rip in the heaviest of conditions. Our parallelogram design keeps the tines in the most efficient ripping angle, regardless of how deep you rip.

The high lift design gets the dozer ripper attachments up and out of the way to give plenty of clearance under the tines; which is ideal when moving your machine.

shank Ripper for bulldozer tine shanks are manufactured from high strength alloy steel. 8E8418 Adapter Shank Fits Caterpillar

Dozer ripper of replacement points are made from heat-treated alloy steel, and designed for fast penetration and quick replacement, and hydraulic cylinders are double acting.

More
  • Affordable price
  • Customized design is Available
  • T/T, L/C or other payment accepted
  • Fast shipping, Worldwide delivery
  • Quality guaranteed
  • Bulk discounts for larger orders

Product Range

Imperial
Parts Number Type Description Weight
104-9275 RIPPER SHANK Caterpillar style ripper shank for a D11 Caterpillar Bulldozer.  This ripper is 4.33” thick, 17.72” wide and 129.6” long.  The bolt hole spacing is 8.66” from the edge to the center of the 1st hole, 30.71” from the edge to the center of the 2nd hole.  It takes a 9W4552 tooth, a 9N4621 ripper guard, a 104-9279 ripper shank adapter, and a 104-9279N ripper shank nose. 1240 kg
3G0109 SHANK Caterpillar style ripper shank that is 20″ long, 5 1/2″ wide and 2 3/8″ thick; Use Item # 9J8913 32 kg
5A9536 SHANK Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 52.49 kg
7J2459 SHANK Caterpillar style ripper shank for a motor grader 165 kg
7J6671 SHANK Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 52.49 kg
8E5339 RIPPER SHANK Caterpillar style ripper shank for a D9 Caterpillar Bulldozer.  This ripper is 2.94” thick, 13” wide and 91.8” long.  The bolt hole spacing is 4.25” from the edge to the center of the 1st hole, 15.87” from the edge to the center of the 2nd hole.  It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. 420 kg
8E5340 RIPPER SHANK Caterpillar style ripper shank for a D8 Caterpillar Bulldozer.  This ripper is 2.94” thick, 13.07” wide and 96.8” long.  The bolt hole spacing is 4.25” from the edge to the center of the 1st hole, 28.27” from the edge to the center of the 2nd hole.  It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. 453 kg
8E5342 RIPPER SHANK Caterpillar style ripper shank for a D8 Caterpillar Bulldozer.  This ripper is 2.94” thick, 13” wide and 75.16” long.  The bolt hole spacing is 4.25” from the edge to the center of the 1st hole, 16.26” from the edge to the center of the 2nd hole.  It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. 347 kg
8E5346  D8N,D9N RIPPER SHANK Caterpillar style ripper shank for a D8/D9 Caterpillar Bulldozer.  This ripper is 2.94” thick, 13” wide and 63.4” long.  The bolt hole spacing is 3.15” from the edge to the center of the 1st hole, 13” from the edge to the center of the 2nd hole.  It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. D8N,D9N 289 kg
8E5347 RIPPER SHANK Caterpillar style ripper shank for a D8 Caterpillar Bulldozer.  This ripper is 2.94” thick, 13.07” wide and 79.13” long.  The bolt hold spacing is 4.25” from the edge to the center of the 1st hole, 16.26” from the edge to the center of the 2nd hole.  It takes a 9W2452 tooth, a 6J8814 ripper guard, an 8E8418 ripper shank adapter, and a 9U9694 ripper shank nose. 365 kg
8E8413 RIPPER SHANK Caterpillar style ripper shank for a D10/D11 Caterpillar Bulldozer.  This ripper is 4” thick, 15.75” wide and 77.85” long.  The bolt hole spacing is 4” from the edge to the center of the 1st hole, 15” from the edge to the center of the 2nd hole.  It takes a 4T4502 tooth, a 6Y8960 ripper guard, a 103-8115 ripper shank adapter, and a 107-3361 ripper shank nose. 620KG
8E8414 RIPPER SHANK Caterpillar style ripper shank for a D9/D10 Caterpillar Bulldozer.  This ripper is 3.5” thick, 14” wide and 91.5” long.  The bolt hole spacing is 8.66” from the edge to the center of the 1st hole, 17.32” from the edge to the center of the 2nd hole.  It takes a 4T4502 tooth, a 9W8365 ripper guard, a 103-8115 ripper shank adapter, and a 107-3361 ripper shank nose. 555 kg
8E8415 RIPPER SHANK Caterpillar style ripper shank for a D9/D10 Caterpillar Bulldozer.  This ripper is 3.5” thick, 14” wide and 71.6” long.  The bolt hole spacing is 4” from the edge to the center of the 1st hole, 13.78” from the edge to the center of the 2nd hole.  It takes a 4T4502 tooth, a 9W8365 ripper guard, a 103-8115 ripper shank adapter, and a 107-3361 ripper shank nose. 435 kg
8J1434 SHANK Caterpillar style ripper shank for a motor grader, takes a 6Y0309 ripper tooth, a 9J6583 pin and a 8E6359 sleeved retainer; Use Item # 9J6586 24.5 kg
8J3215 SHANK Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer; Use Item # 9J3139 52.49 kg
9J3139 SHANK Caterpillar style ripper shank for a motor grader; takes a 6Y0359 ripper tooth, a 9J2358 pin and a 6Y9459 retainer 52.49 kg
9J6586 SHANK Caterpillar style ripper shank for a motor grader, takes a 6Y0309 ripper tooth, a 9J6583 pin and a 8E6359 sleeved retainer 24.5 kg
9J8913 SHANK Caterpillar style ripper shank that is 20″ long, 5 1/2″ wide and 2 3/8″ thick, takes a 6Y0309 ripper tooth 32 kg
9J8923 SHANK Caterpillar style curved ripper shank, takes a 6Y0359 ripper tooth 56.7 kg
9W7382 SHANK Caterpillar style ripper shank that is 48 3/4″ long, 9″ wide and 3″ thick, takes a 6Y0359 ripper tooth 170 kg
9J3199 SHANK D5,D6 SHANK 63 kg
32008082 SHANK D5,D6 SHANK 65 kg
8E8418 SHANK D8K,D9H ripper shank adapter, the tooth point 9W2451, PROTECTOR 6J8814 75KG
8E5346 SHANK D8N,D9N SHANK, the tooth point 9W2451, PROTECTOR 8E1848 289KG
D9R SHANK  D9R SHANK, the tooth point 4T5501, PROTECTOR 9W8365  560kg
118-2140 SHANK D10 SHANK, PROTECTOR 6Y8960 745kg
8E8411 SHANK D10N SHANK, the tooth point 4T5501, PROTECTOR 9W8365 635kg
1049277 SHANK D11 SHANK, the tooth point 9W4551, PROTECTOR 9N4621  1043kg
1U3630-HC ADAPTER 1U3630-HC ADAPTER, the tooth point 4T5501 133 kg
Metrics