3001288 R914 Liebherr Bucket Tip Point, Wear Parts Casting R914 Liebherr Digger Standard Type Side Pinned Tooth, Replaceable Backhoe Loader Excavator Bucket Tip Points, Liebherr Tooth System, Replacement Hydraulic Excavator Bucket Tooth & Adapter China Supplier 3001288 R914 Liebherr Bucket Tip Point SPECIFICATIONS PART NO. 3001288 , R14 Replacement Brand Liebherr Application Excavator, Loader Material […]
400RH Right Adco Spare Part Bucket Teeth Point, Adco Tiger Teeth Point, Adco style Left Hand Tiger Excavator Bucket Teeth, Tooth Tip Point China Factory replacement Adco parts spare part, Hensley Style Bucket Teeth For Excavators, Loaders & Backhoes
400RH Right Adco Spare Part Bucket Teeth Point – Adco style 400 series RIGHT hand tiger excavator bucket tooth, takes a 9J2358 pin and an 8E6359 lock
Weight: 20.39 lb / 9.25 kg
What the orginal referance means：
The forth and fith digit describes the size of the bucket tooth
The last digit of the referance describes the shape of the tooth
The most common shapes are
1 = Short
2 = Long
3 = Abrasion
Our Main Product
Excavator Teeth, Adaptor & Pin lock
one stop solution of high quality ground engaging tools, mining equipment, tooth, adaptors, shrouds,bulldozer blades, cutting edges, fasteners, ripper shanks, bucket protection for cat, john deer,hyundai,komatsu, daewoo,volvo, jcb and all other brands.
Blade & Cutting Edges
Bolt & Nut
Agricultural Machinery Parts
Our goal is to provide the longest wearing replacement parts available to the Agricultural community with unrivaled quality.We cast our parts of an extremely durable material which makes our parts the longest lasting on the market. 400LH Left Adco Bucket Teeth Adapter
The ability to penetrate tough material, when it’s tightly compacted, rocky or frozen. The best penetrating tooth is typically a sharp pointed end, often referred to as a Tiger Tooth. Teeth with high penetration that also have high impact are best suited to digging and trenching applications as they enable the bucket to more easily penetrate material. However, they are not always the best tooth for providing a smooth bottom to a hole or trench and you should weigh the full needs of your job when choosing a tooth system.
How well the tooth stands up to penetrating shocks and high breakout forces. Simply put, how sturdy is the tooth and how will it hold up on a powerful digging machine. Teeth with high impact are best suited for digging and trenching applications when using an excavator, backhoe or other machine with high breakout force. Adco style Left Hand Tiger Tooth Point, 400C Center Hand Adco Tiger Teeth
Third – Choose the right retention system
The way you mount the tooth to the adapter(shank) can determine how firm the tooth will stay over time. It will also determin how easy the tooth is to replace when worn.
Flex pin – Horizontal:Flex pins are two steel forgings that have a neoprene rubber in between. As you pound the pin through, it squeezes the neoprene and that holds the tooth up on the adapter. Installed and removed properly, Flex pins can be re-used up to 10 times.
Flex pin – Diagonal (Rhombic System):Using a slightly longer flex pin than the horizontal mounting system. The Rhombic system mounts the tooth and flex pin at a 45 degree angle. This makes installation and removal as easy as the vertical system while providing the strength of the horizontal system.
Roll pin – vertical:This looks like a steel coil. The pin is pounded down through the top rather than through the side. Roll pins are not re-useable and must be replaced new with each tooth installation.
Crimp on:The sides of the tooth itself are crimped into impressions on the adapter. This is a more cost-effective option for smaller less-powerful machines