News

/News
  • Hitachi GET parts Side cutters

Hitachi GET parts Side cutters

Hitachi GET parts Side cutters Features of the Hitachi Select Parts 100% compatibility with Hitachi Genuine Parts. Parts warranty same as Hitachi Genuine Parts (1 year/unlimited hours). Comprehensive service and support. World wide parts availability. Recommendable to the following customers Customers who intend to sell the machine in the future and would like to repair [...]

  • Laminated White Iron

Laminated White Iron

Laminated White Iron In every case, we enable customers to: •Reduce downtime due to unscheduled break downs •Save on equipment cost & renewal costs •Save man hours on maintenance •Minimising & eliminating lost production •Increase their bottom line by achieving savings in all of the above Typical Data Numbers White Iron Wear Parts Usage life [...]

  • Kmax Tooth System

Kmax Tooth System

Kmax - Ground Engaging Tools (G.E.T.) - Kmax Tooth System For excavators from 12 tonnes up to 80 tonnes For wheel loaders from 120 HP up to 800 HP Optimized Machine Komatsu takes care of every aspect of your machine. That includes offering the most advanced, most reliable and best fitting parts to optimize machine [...]

  • KOMTRAX

What is KOMTRAX?

What is KOMTRAX? KOMTRAX is Komatsu’s complimentary remote monitoring system. KOMTRAX harnesses satellite and mobile based Information Communication Technology (ICT) data to allow you to monitor the location, health and performance of every machine in your fleet – whether a single machine or hundreds of units. KOMTRAX KOMTRAX is completely compatible with the [...]

  • Komatsu Training Facilities

Komatsu Training Facilities

Komatsu Training Facilities Komatsu Technical Education Centre (KTEC) KTEC has become Komatsu Australia’s primary training centre for operators and technicians in Australia, New Zealand and New Caledonia. It is one of the region’s most advanced technical training facilities for mining, earthmoving and utility equipment. Located on more than 3 hectares of land, it has more [...]

  • Komatsu Finance

Komatsu Finance

Komatsu Finance tailors equipment finance solutions to suit the individual requirements of each customer. Some of the products provided by Komatsu Finance include hire purchase, operating lease and finance lease. The accounting and taxation treatment of financial products is subject to change. We strongly recommend that you seek independent advice from your taxation and accounting [...]

Alloy Steel Casting

Alloy steel casting is the steel casting process that is alloyed with numerous elements in total amounts between 1.0% and 50% by weight to improve its mechanical properties. Alloy steels are broken down into two groups: low-alloy steels and high-alloy steels. Most commonly, alloy steels used in investment casting are low-alloy steels. Strictly speaking, every [...]

By |July 23rd, 2019|Industry Kownledge, Industry News, News|Comments Off on Alloy Steel Casting
  • Carbon Steel Casting

Carbon Steel Casting

Carbon Steel Casting What is carbon steel? Carbon steel is among one of main materials in the world of steel castings. Carbon steels can be classified into below types according to their carbon content: Low-carbon steels (< 0.20% C): Offer a range of tensile properties via heat treatment and can be hardened to give high [...]

By |July 21st, 2019|Construction Industry, Industry Kownledge, Industry News, News|Comments Off on Carbon Steel Casting
  • Plow Edges

Plow Edges

Plow Edges created a patented, curved cutting edge that last up to twice as long as traditional edges. It's easier on the roads & equipment as it glides over imperfections and cracks, thus reducing equipment damage and results in fewer potholes and repairs. Plow Edges 3/4" Thick Through Hardened Steel EDGE Recommended for [...]

By |July 19th, 2019|Construction Industry, Cutting-edge, GET Parts, Heavy Equipment Machinery, Industry Kownledge, News, Snow Plow|Comments Off on Plow Edges
  • Selecting the Right Bucket Tooth

Selecting the Right Bucket Tooth

Selecting the Right Bucket Tooth System- Few components of a loader, backhoe or excavator can do more to help or hinder your productivity than the teeth on the bucket. So, how can you wade through the multitude of choices on the market today? The key is to match the tooth and the adapter, or shank, [...]

  • segment-6P9102-D6D-D6C-D6H-ripper-shank

Segment 6P9102,D6D,D6C D6H Ripper Shank

Segment 6P9102,D6D,D6C D6H Ripper Shank, Caterpillar D6D D6C D6E Multi-Shank Bulldozer Rippers Manufactured to Australian specifications from wear-resistant solid 400-450 grade steel Shipped assembled Australia Wide Fits to rear of bulldozer using existing mounting points (bolts & shims supplied) May be professionally fitted by Southern Tool + Equipment Co, or supplied with detailed fitting instructions [...]

By |June 6th, 2019|Caterpillar, Construction Machinery, Earth Moving Equipment, Equipment, Heavy Equipment Machinery, Industry Kownledge, News, Ripper Shank, Segment, Undercarriage Parts|Comments Off on Segment 6P9102,D6D,D6C D6H Ripper Shank
  • J550 Excavator Parts Tooth Point 9W8552

J550 Excavator Parts Tooth Point 9W8552

J550 Excavator Parts Tooth Point 9W8552, 9W8552 TL, 9W8552RC, 9W8552WTL Weight:9W8552 Model:J550 Type:Heavy Duty Our bucket teeth, adapters and protectors feature an innovative design that helps increase the life of the teeth and improves its efficiency for every application.Our replacement bucket teeth achieve the optimum balance between hardness and toughness with hardness levels up to [...]

By |May 7th, 2019|Bucket Teeth, Caterpillar, Construction Equipment, Earth Moving Equipment, Equipment, Excavator, GET Parts, News, Teeth & Adapters|Comments Off on J550 Excavator Parts Tooth Point 9W8552
  • Grader Rebuild Facilities

Our Cat Graders and Grader Rebuild Facilities

Our Cat Graders and Grader Rebuild Facilities We offer a visual tour of our facilities and rebuild process, as an introduction to our graders and how we recondition them. Our graders We specialise in restoring three models of Cat motor graders - the 140G, 140H and the 140K. The Cat 140G grader The original grader [...]

By |March 22nd, 2019|Caterpillar, Construction Companies, Construction Equipment, Construction Machinery, Equipment, Heavy Equipment Machinery, Industry News, Motor Grader, News|Comments Off on Our Cat Graders and Grader Rebuild Facilities

YASSIAN will attend the Bauma Exhibition in Germany 2019

YASSIAN will attend the Bauma Exhibition 8-14 April, 2019 in Munchen of Germany YASSIAN Booth No. B5-128

By |March 17th, 2019|Industry News, News|Comments Off on YASSIAN will attend the Bauma Exhibition in Germany 2019

Historic Motor Grader Pictures

Historic Motor Grader Pictures - Road graders have come a long way since their humble beginning in 1885. Here we trace the history of graders, from the horse-drawn, two-wheeled graders of the late 19th century, to the modern diesel-powered, earth-moving machines produced by Caterpillar, John Deere, and others. The earliest graders consisted of a simple [...]

By |December 17th, 2018|News|Comments Off on Historic Motor Grader Pictures

What’s Special about Reconditioned Cat 140H Motor Graders

The Cat 140H’s sound structure and thoughtful design make it hard-wearing and robust – and like all Caterpillar graders, it’s known for its reliability. These are among the characteristics that make reconditioned Cat 140H motor graders such an excellent proposition. Here we offer an overview of the Cat 140H’s key features. Why consider a reconditioned [...]

By |December 12th, 2018|News|Comments Off on What’s Special about Reconditioned Cat 140H Motor Graders
  • CAT WHEEL LOADERS GET THE JOB DONE—AND THEN SOME

CAT WHEEL LOADERS: GET THE JOB DONE—AND THEN SOME

CAT WHEEL LOADERS GET THE JOB DONE—AND THEN SOME CAT WHEEL LOADERS: GET THE JOB DONE—AND THEN SOME Simple loading and stockpiling? Aggregate handling? Maximizing payloads? Whatever your work demands, you’ll find a Cat Wheel Loader that gets it done—with the performance, reliability and technology options you need. Purpose built for your jobs, our [...]

By |December 11th, 2018|Bucket Cutting Edge, Caterpillar, Construction Companies, Earth Moving Equipment, Equipment, Loader, News|Comments Off on CAT WHEEL LOADERS: GET THE JOB DONE—AND THEN SOME

YASSIAN in San Paulo Expo Center 2018 Bauma M&T Expo

YASSIAN in San Paulo Expo Center 2018 Bauma M&T Expo Our company successfully participated in the 2018 Bauma M&T Expo San Paulo exhibition and received hundreds of new and old customers.

By |December 5th, 2018|News|Comments Off on YASSIAN in San Paulo Expo Center 2018 Bauma M&T Expo
  • Changing a Motor Grader Blade

Changing a Motor Grader Blade

Changing a Motor Grader Blade Proper maintenance is vital for keeping a motor grader performing optimally – and of all maintenance tasks, the most important is ensuring that the grader has a good cutting edge. The blade that's bolted to the moldboard has a cutting edge along its bottom. Depending on the grader, there may [...]

By |December 4th, 2018|Bucket Cutting Edge, Construction Equipment, Construction Machinery, Earth Moving Equipment, Heavy Equipment Machinery, Motor Grader, News|Comments Off on Changing a Motor Grader Blade
  • YASSIAN-in-Shanghai-2018-Buama-China

YASSIAN in Shanghai 2018 Bauma China

YASSIAN in Shanghai 2018 Bauma China Our company successfully participated in the 2018 Bauma Shanghai exhibition and received hundreds of new and old customers. YASSIAN-in-Shanghai-2018-Bauma -China YASSIAN-Blades-and-Teeth-Shanghai-2018-Bauma -China  

By |December 1st, 2018|China Construction Machinery News, News|Comments Off on YASSIAN in Shanghai 2018 Bauma China