Construction Machinery

/Construction Machinery
  • Hitachi bucket tooth and adapters family

Hitachi bucket tooth and adapters family

Hitachi bucket tooth and adapters family Hitachi Bucket Teeth 25S, EX70 PC100 Weight1.8KG READ MORE Hitachi Bucket Teeth TD22094,ZAX120 Weight3.9KG READ MORE Hitachi Bucket Teeth TC20383,EX70 Weight2KG READ MORE Hitachi Bucket Teeth H401478HRC,EX450 Weight19.8KG READ MORE Hitachi bucket tooth and adapters family Hitachi Bucket Teeth H401478HRC,EX450 Weight19.8KG READ MORE Hitachi Bucket Teeth TB00394,PC100,EX70 [...]

  • CAT BULLDOZER FLAT END BITS

CAT BULLDOZER FLAT END BITS

CAT BULLDOZER FLAT END BITS 100-3131 DOZER END BIT RH (UT) 45 MM. D9 100-3132 DOZER END BIT LH (UT) 45 MM. D9 100-3133 DOZER END BIT RH (UT) 60 MM. D9 100-3134 DOZER END BIT LH (UT) 60 MM. D9 100-3135 DOZER END BIT RH (UT) 45 MM. D9 100-3136 DOZER END BIT LH [...]

  • Excavator Loose Soil Hook

Excavator Loose Soil Hook

Excavator Loose Soil Hook The small excavator loose soil hook area provides us with small excavator loose soil hooks, Yuchai small excavator loose soil, small excavator loose soil buckets, excavator loose soil hooks, etc. In the armor network, the armor network is a professional information integration platform for the construction machinery industry, including: excavator, loader, [...]

  • How to remove Loader pivot pin stuck

How to remove Loader pivot pin stuck?

How to remove Loader pivot pin stuck? The loader arms pivot pin was rotating in the quick switch housing ends housing rather than where its supposed to rotate, in the loader arm. It sheared the through bolt that holds it in place. Its a 1-1/8" diameter pin. I cut the pin on both sides so [...]

  • 5 Ways to Turn Wheel Loader Operator Ignorance into Machine-saving Expertise

5 Ways to Turn Wheel Loader Operator Ignorance into Machine-saving Expertise

5 Ways to Turn Wheel Loader Operator Ignorance into Machine-saving Expertise Even experienced wheel loader operators can benefit from these tips to extend wheel loader life and performance Even the most skilled operator can shorten a wheel loader's life and reduce its productivity by misusing certain functions or by operating the machine in a way [...]

By |January 29th, 2021|China Construction Machinery News, Construction Equipment, Construction Machinery, Earth Moving Equipment, Heavy Equipment Machinery, Industry Kownledge, Industry News, Loader, Maintenance, News, Wear Parts, Wear Plates|Comments Off on 5 Ways to Turn Wheel Loader Operator Ignorance into Machine-saving Expertise
  • Standard & Customized Blades Cutting Edges

Standard & Customized Blades / Cutting Edges

Standard & Customized Blades / Cutting Edges We provides standard & customized blades for excavators (backhoe, face shovel, electrical shovel), loaders, tractors, bulldozers, motor graders, and scrapers. Specifically speaking, the blades we supply are as follows but not limited to them. Excavator Blades / Cutting Edges / End Bits Weld-on blades Bolt-on blades Fabricated side [...]

  • Bucket Tooth System For Main Machineries

Bucket Tooth System For Main Machineries

Bucket Tooth System For Main Machineries Deciphering tooth and adapter size depends on the type and size of the machine. Just for you reference. OEM replacement brands CAT, ES-CO, H&L, JD, Komatsu, JCB, VOlvo ... Bucket Tooth System For Main Machineries Excavators (mt) <7 7-10 10-15 15-20 20-25 25-30 35-40 40-50 50-60 Loaders [...]

By |November 8th, 2020|Bucket Adapter, Bucket Cutting Edge, Bucket Teeth, Construction Machinery, Earth Moving Equipment, GET Parts, Industry Kownledge, News, Teeth & Adapters|Comments Off on Bucket Tooth System For Main Machineries

Loader GET System Solution

Loader GET System Solution The Loader bucket lip system has been designed to maximise the performance of your loader bucket when operating in a range of mining and quarry applications, by penetrating deeper and more efficiently through the surface to dig, load and haul more material for longer periods. Ultralok teeth and adapters have been [...]

  • Selecting Right Snowplow Blades for Your Equipment

How to Selecting Right Snowplow Blades for Your Equipment

How to Selecting Right Snowplow Blades for Your Equipment LESS TIME. LESS LABOR. LESS OVERHEAD COSTS. THESE DAYS, IT SEEMS EVERY COMPANY IS STRETCHED TO DO MORE WITH LESS. WHILE ’LESS’ SEEMS TO BE THE OPERATIVE WORD, IT’S THE ’MORE’ THAT REALLY COUNTS. MORE EFFICIENCY. MORE PRODUCTIVITY. AND THE BIG ’MORE’ — MORE PROFIT. To [...]

By |October 26th, 2020|Blades, Construction Equipment, Construction Machinery, Cutting-edge, Equipment Brands, GET Parts, Heavy Equipment Machinery, Industry Kownledge, Snow Plow|Comments Off on How to Selecting Right Snowplow Blades for Your Equipment
  • Single Blade Moldboards and Trip Edges

Single Blade Moldboards and Trip Edges

Single Blade Moldboards and Trip Edges = NO SNOW LEFT BEHIND Most traditional single blade manufacturers offer a trip edge feature. As an obstacle is encountered, the plow ’trips’ or lifts slightly to clear the object without damaging the plow. The drawback is that when the plow lifts up, it misses a large amount of [...]

By |October 19th, 2020|Blades, Bucket Cutting Edge, Construction Equipment, Construction Machinery, Cutting-edge, GET Parts, Industry Kownledge, Industry News, Snow Plow|Comments Off on Single Blade Moldboards and Trip Edges
  • Bucket Wear Plates Protect your Expensive Machinery

Bucket Wear Plates Protect your Expensive Machinery

Bucket Wear Plates Protect your Expensive Machinery Abrasion resistant wear plates or steel liners are used in many applications where friction between two parts or materials creates degradation. Wear plates are expendable items that are used to prevent excessive wear or damage to expensive equipment. Our Cutting Edges provides all of its wear plates with [...]

By |October 12th, 2020|Blades, China Construction Machinery News, Construction Machinery, Cutting-edge, GET Parts, Industry Kownledge, Industry News, Wear Parts, Wear Plates|Comments Off on Bucket Wear Plates Protect your Expensive Machinery
  • Chocky Bar Wear Parts for Your Equipment Buckets

Chocky Bar Wear Parts for Your Equipment Buckets

Chocky Bar Wear Parts for Your Equipment Buckets Uses, advantages, and benefits Chocky Bars are unique block products, which have the ability to be formed and welded onto flat or curved surfaces. Chocky Bars can be used on a range of fixed plant and mobile equipment such as buckets and chute liners. Their appearance is [...]

  • Volvo Loader Cutting Edges / Blades / End Bits

Volvo Loader Cutting Edges / Blades / End Bits

Volvo Loader Cutting Edges / Blades / End Bits Weld-on bladesBolt-on blades and segments (end bits)Straight bladesSpade-noze blades (V-type)Weld-on and bolt-on lip shrouds (lip protectors)Half-arrow blades for underground loadersCarbide impregnated bladesCompatible Loaders: VOLVO Volvo Loader Cutting Edges / Blades / End Bits VOLVO L60H Loader Cutting Edge/Blades/End BitsVOLVO L70H Loader Cutting Edge/Blades/End BitsVOLVO [...]

  • 1U-0257

CAT Adapters

CAT Adapters 168-1408 J Series (side pin) Adapter J400 Position: Left Hand Abrasion Resistant Material: Standard Option Adapter Size: J400 Machine: Excavator Attachment: Weld-On 168-1408 J Series (side pin) Adapter J400 Position: Left Hand Abrasion Resistant Material: Standard Option Adapter Size: J400 Machine: Excavator Attachment: Weld-On 168-1457 J Series (side pin) Adapter J460 Position: Right [...]

  • BUCKET TOOTH MANUFACTURING PROCESS FLOW

BUCKET TOOTH MANUFACTURING PROCESS FLOW

BUCKET TOOTH MANUFACTURING PROCESS FLOW Bucket tooth of excavator is an important part of excavator. Similar to human teeth, it is also a wearing part. It is a combination of bucket tooth composed of tooth base and tooth tip, and the two are connected by pin shaft.Because the bucket tooth wear failure part is the [...]

  • distinguish the quality of bucket teeth

How to distinguish the quality of bucket teeth

How to distinguish the quality of bucket teeth How to distinguish the quality of bucket teeth? We can distinguish from several aspects, such as manufacturing process, air hole, thickness of tooth tip and weight of bucket tooth At present the best craft on market is forging bucket tooth, because forging craft density is high, so [...]

By |August 3rd, 2020|Bucket Teeth, China Construction Machinery News, Construction Industry, Construction Machinery, Excavator, GET Parts, Industry Kownledge, Industry News, News, Teeth & Adapters|Comments Off on How to distinguish the quality of bucket teeth
  • Inquiry for CAT Parts

Inquiry for CAT Parts

Inquiry for CAT Parts Can you supply us with the CAT parts below? Excavator CAT 385CL       Item Part Number Description Qty 1 232-2172 Adapter (Vertical Pin) 1 2  232-2170 Adapter (Vertical Pin) 2 3 232-2171 Adapter (Vertical Pin) 1 4  264-2171 Heavy Duty Tip 4 5 232-0170 Retainer 3       [...]

How to choose the right excavator teeth

How to choose the right excavator teeth 4 key factors when choosing the right excavator teeth 1. Manufacture The construction and material of the excavator teeth and adaptor is a major criteria, as this will directly determine its wear life and strength, but so is the shape and design. Teeth are cast in foundries, mostly [...]

  • TOP 4 EXCAVATOR ATTACHMENTS FOR LANDSCAPERS

TOP 4 EXCAVATOR ATTACHMENTS FOR LANDSCAPERS

TOP 4 EXCAVATOR ATTACHMENTS FOR LANDSCAPERS As the days start to get longer, and gradually begin to get warmer the landscaping season is getting into full swing. One of the questions we often get asked is What excavator attachments are worth adding to my array of tools? Obviously a digger isn't much use without a [...]

  • Forging Teeth vs Casting Teeth

Forging Teeth vs Casting Teeth

Forging Teeth vs Casting Teeth Forging is processing way that putting pressure on metal blank by forging machinery, making it produce plastic deformation, in order to obtain certain mechanical properties, a certain shape and size of forgings. Forging can eliminate the as-cast osteoporosis of the metal, welded holes, and generally mechanical properties of forging is [...]