G.E.T Parts

/YASSIAN G.E.T Parts

About YASSIAN G.E.T Parts

This author has not yet filled in any details.
So far YASSIAN G.E.T Parts has created 290 blog entries.
  • Difference Between Forged and Cast Teeth

Difference Between Forged and Cast Teeth?

Difference Between Forged and Cast Teeth? You will undoubtedly notice that there are various types of bucket teeth available. Usually forged and cast bucket teeth will be among the types offered. What is the difference between forged and cast teeth? How do you know which to choose? To ensure strength and durability, bucket teeth are [...]

By |January 17th, 2021|Bucket Adapter, Bucket Teeth, Construction Equipment, Earth Moving Equipment, Excavator, GET Parts, Industry Kownledge, Industry News, Teeth & Adapters, Tips|Comments Off on Difference Between Forged and Cast Teeth?
  • Complete Range of Ground Engaging Tools for All Types of Equipment

Complete Range of Ground Engaging Tools for All Types of Equipment

Complete Range of Ground Engaging Tools for All Types of Equipment Quality steel with special hardness, flexibility and wear resistance. Teeth, adapters, cutting edges, end bits, ripper shanks, protectors, and much more. The steel used in the production of our wear protection material provides a special combination of hardness, flexibility and wear resistance. A comprehensive [...]

  • Ground Engaging Tools (G.E.T.) Wear Parts

Ground Engaging Tools (G.E.T.) Wear Parts

Ground Engaging Tools (G.E.T.) Wear Parts Ground Engaging Tools (G.E.T.) is a high-quality system designed to protect against structural harm and wear to your heavy equipment. G.E.T. parts assist you to protect expensive blades, buckets and ripper shanks on your machines from wear and structural harm from the moment they hit the ground. Suitable for [...]

  • Steps to Replace Grader & Bulldozer Blades

Steps to Replace Grader & Bulldozer Blades

Steps to Replace Grader & Bulldozer Blades Step 1 Bulldozer should put on flat and hard safety ground. Step 2 Lifts the shovel blade to the highest point, supports the pusher arms firmly with sleepers, extinguishes the bulldozer, prevents the shovel blade from falling and causes casualties. Step 3 Clean the soil and cover on [...]

  • extend the wear life of the bucket teeth

How to extend the wear life of the bucket teeth

How to extend the wear life of the bucket teeth Matching the correct excavator tooth to your machines can significantly reduce wear rates and increase ease of digging. This results in faster cycle time, less fuel consumption and reduced downtime. We can give professional suggestions of the correct bucket tooth for your application. Rotating your [...]

By |December 30th, 2020|Bucket Teeth, China Construction Machinery News, Construction Industry, Earth Moving Equipment, Excavator, GET Parts, Industry Kownledge, Industry News, Maintenance, News, Teeth & Adapters, Tips|Comments Off on How to extend the wear life of the bucket teeth
  • How to Weld Flush Mount Adaptors

How to Weld Flush Mount Adaptors

How to Weld Flush Mount Adaptors 1. Place the adaptor on the lip so that the corner adaptors are well placed on the corners. Make sure that they sit well on the level of the blade. 2. Preheat and start welding several points to maintain the adaptors in place. 3. It is convenient to start [...]

By |December 27th, 2020|Bucket Adapter, China Construction Machinery News, Construction Equipment, GET Parts, Industry Kownledge, Industry News, Loader, Teeth & Adapters|Comments Off on How to Weld Flush Mount Adaptors
  • SKID STEER BUCKET EDGE OPTIONS

SKID STEER BUCKET EDGE OPTIONS

SKID STEER BUCKET EDGE OPTIONS BOLT-ON The most common and inexpensive bucket edge. Bolt-on edges protect and increase strength to the front end of the bucket. They prevent the bucket edge (lip) of the bucket from wearing. The bolt-on edge is replaceable, reversible, and beveled on both sides. It can be reversed before it wears [...]

  • FANGGS Bucket Tooth Position

FANGGS Bucket Tooth Position

FANGGS Bucket Tooth Position FANGGS teeth have a curved shape to extend the contour of the bucket which results in a continuous flow of material to achieve maximum bucket fill. Reversing Fanggs teeth so that the curve of the tooth is opposite that of the bucket is not recommended. FANGGS Bucket Tooth Position [...]

By |December 21st, 2020|Backhoes, Bucket Teeth, Construction Equipment, Construction Industry, Equipment Brands, Excavator, FANGGS, GET Parts, Loader, Teeth & Adapters, Tips|Comments Off on FANGGS Bucket Tooth Position
  • Bucket Tooth Basics

Bucket Tooth Basics

Bucket Tooth Basics Tooth Performance and Wear Life Maximum performance and wear life are the two most important characteristics for replacement teeth. Working with constant abrasive material places extreme demands on both design and strength. Design is directly related to performance while strength is directly related to wear life. Tooth Penetration Penetration is a key [...]

  • Dozer Cutting Blades

Dozer Cutting Blades

Dozer Cutting Blades have been designed for light, rough and finish grading applications in dirt and gravel. They range in thickness from 13mm up to 60mm and width from 152mm up to 480mm to suit your application. Dozer Centre Blades | CAT Dozer End Blades | CAT Dozer Centre Blades | Komatsu Dozer End Bits [...]

  • Standard & Customized Blades Cutting Edges

Standard & Customized Blades / Cutting Edges

Standard & Customized Blades / Cutting Edges We provides standard & customized blades for excavators (backhoe, face shovel, electrical shovel), loaders, tractors, bulldozers, motor graders, and scrapers. Specifically speaking, the blades we supply are as follows but not limited to them. Excavator Blades / Cutting Edges / End Bits Weld-on blades Bolt-on blades Fabricated side [...]

  • Bucket Adapter Installation

Bucket Adapter Installation

Bucket Adapter Installation Various retention methods between the adapter and bucket as well as the tooth and adapter are available. Check the condition of the bucket and repair as necessary before installing an adapter. Bolt-On Adapters When installing a new adapter, be sure the cutting edge provides a firm mounting base. If the edge has [...]

By |December 9th, 2020|Bucket Adapter, China Construction Machinery News, Construction Industry, GET Parts, Industry Kownledge, Industry News, News, Teeth & Adapters, Tips|Comments Off on Bucket Adapter Installation
  • TWIN RAM TILT BUCKET

TWIN RAM TILT BUCKET

TWIN RAM TILT BUCKET Elite Tilt Bucket The durable and field-proven design of the Elite Tilt Bucket means increased power, control and efficiency. Featuring unbelievable strength, capacity and shaping results the NEW design is the Elite standard in Tilt Buckets. The TWIN RAM TILT BUCKET is premium double ram tilt bucket. It is the best [...]

  • CUTTING EDGE RANGE

CUTTING EDGE RANGE

CUTTING EDGE RANGE A FULL RANGE OF BOLT-ON AND WELD-IN CUTTING EDGES ARE AVAILABLE FOR ALL MAKES AND MODELS OF EXCAVATORS, LOADERS, DOZERS, SCRAPERS, GRADERS, COMPACTORS AND OTHER EARTHMOVING MACHINES CUTTING EDGE PROFILES Single Bevel, Half Arrow and Double Bevel Cutting Edge profiles are available to suit all types of buckets and blades. CUTTING [...]

  • Loader Cutting Blades

Loader Cutting Blades

Loader Cutting Blades Loader Blades are ideal for bucket rebuilds and replacement of worn or damaged blades on your machine. loader cutting blades are available in four main configurations and can also be custom manufactured using polyethelene engineering plastic: Standard Blades: Used with loose material and loading applications. Straight Edge Rock: Used with loose or [...]

Digging Bucket

Digging Bucket GENERAL PURPOSE / TRENCH BUCKET The digging/rock buckets are designed to improve the efficiency of your machines. Suited to a wide range of tasks and coming in a variety of widths from the standard bulk bucket width to a trench bucket width. These buckets can be used with a normal coupler or a [...]

  • HYDRAULIC TILT BUCKET

HYDRAULIC TILT BUCKET

HYDRAULIC TILT BUCKET, Single Ram Tilt Bucket The ideal Tilt Bucket for Mini Excavators up to 4 Tonnes. Utilising the same innovative technology as our larger Elite Tilt Bucket, the Single Ram Tilt Bucket can be heavily relied upon to perform. The double-acting ram has been mounted in the optimum position to leverage more power [...]

  • 4 IN 1 MULTI-PURPOSE BUCKET

4 IN 1 MULTI-PURPOSE BUCKET

MULTI-PURPOSE BUCKET All In One Bucket / 4 IN 1 BUCKET The All In One Bucket is an evolution in the digging multipurpose bucket range. With its full digging bucket capability and extendable front edge, it can easily transition to picking up items from digging without changing attachments. The All In One Bucket features durable [...]

By |November 14th, 2020|Blades, Bucket, Bucket Cutting Edge, Construction Companies, Construction Equipment, Cutting-edge, Earth Moving Equipment, Excavator, GET Parts, Side Cutter|Comments Off on 4 IN 1 MULTI-PURPOSE BUCKET
  • What Influences Wear Life of Bucket Tooth

What Influences Wear Life of Bucket Tooth

What Influences Wear Life of Bucket Tooth Bucket teeth are the key components of an excavator and affect its efficiency. Bucket teeth are in direct contact with ore, sand, rock, and other materials under the action of external forces, and they not only bear strong impacts, but also the bending moment. With different working conditions, [...]

By |November 9th, 2020|Bucket Adapter, Bucket Teeth, GET Parts, Industry Kownledge, Industry News, News, Teeth & Adapters|Comments Off on What Influences Wear Life of Bucket Tooth
  • Bucket Tooth System For Main Machineries

Bucket Tooth System For Main Machineries

Bucket Tooth System For Main Machineries Deciphering tooth and adapter size depends on the type and size of the machine. Just for you reference. OEM replacement brands CAT, ES-CO, H&L, JD, Komatsu, JCB, VOlvo ... Bucket Tooth System For Main Machineries Excavators (mt) <7 7-10 10-15 15-20 20-25 25-30 35-40 40-50 50-60 Loaders [...]

By |November 8th, 2020|Bucket Adapter, Bucket Cutting Edge, Bucket Teeth, Construction Machinery, Earth Moving Equipment, GET Parts, Industry Kownledge, News, Teeth & Adapters|Comments Off on Bucket Tooth System For Main Machineries